GeoGem Limited, manufacturer of high performance diamond drill bits for mining, civil engineering, geotechnical and oil industries
Return to GeoGem Homepage Read our Latest News Find out about our Products Technical Data and Operating Tips Discover how diamond bits are made Get answers to your questions About GeoGem

NQ CORE BIT - W PROFILE -  THICK KERF
N W/L CORE BIT
W PROFILE - THICK KERF


T6 101 CORE BIT - FLAT PROFILE - THIN KERF
T6 101 CORE BIT - FLAT PROFILE - THIN KERF.


T6 H IMPREGNATED CORE BIT - W PROFILE
T6 H IMPREGNATED CORE BIT - W PROFILE
 

DIAMOND IMPREGNATED CORE BITS

Impregnated core bits can drill a broad range of geological formations from the softest to the hardest rock. They are manufactured with very small, high quality synthetic diamonds mixed evenly through a metal matrix. During drilling the matrix wears away evenly resulting in continuous exposure of new sharp diamond points. This gives an efficient and stable cutting action throughout the life of the bit. All bits have extra T.C. and diamond gauge protection. The optimum diamond size, concentration and matrix composition is dependant on the hardness and abrasiveness of the formation to be drilled.

MATRIX TYPE G2. (Brown)
Very hard matrix. Abrasive resistant. Requires high torque and thrust.

MATRIX TYPE G4. (Blue)
Hard Matrix. Good performing matrix giving increased penetration rates in abrasive and medium fractured conditions.

MATRIX TYPE G6 - G7. (Green)
Medium to soft matrix. General purpose matrix. Free cutting giving good penetration rate in low abrasive medium to fine grained conditions.

MATRIX TYPE G8 - G10. (Red)
Soft matrix. Free cutting giving good penetration in very hard fine grained conditions which tend to polish matrix.

 

Select Product Type from Pulldown Menu:

FACE PROFILES

FACE PROFILES
Thin kerf bits ( e.g. TT, T2, and T6 range ) are manufactured in flat profile and thicker kerf bits ( e.g. DCDMA and Wireline ) in W profile.


WATERWAYS
The number and depth of waterways is optimised for the formations to be drilled.


DEPTH OF IMPREGNATION (D.I.)
Core bits are manufactured in two standard depths of impregnation : 4 mm and 6 mm ( other depth can be supplied to order.The deep matrix is more cost effective when drilling medium to hard non abrasive formations. The shallower matrix is more suited to highly abrasive or fractured formations where large wear of the bit diameter is anticipated and a deep matrix cannot be fully utilised.


Home I News I Products I Technical I Manufacturing I Support I About Us
GeoGem Limited, Unit 15, Colomendy Business Park, Denbigh, Denbighshire LL16 5TA, U.K.
Tel: 01745 815315   Fax: 01745 815495   Email: sales@geogem.co.uk
Copyright © 2000 GeoGem Limited. All rights reserved.